I bought the stainless fastener set for the ct90 from MMS&Accessories and I've replaced all of the bolts
that I know the kit should.
That consists of
1 the center crankcase
2 the clutch cover
3 the left case cover
4 then sub trans cover
5 the point and the stator covers
6 the rocker arm access cover
I still have 15 bolts left and can't figure what they are used for.
this is what's left
6- 6x25
4- 6x45
2- 6x30
1- 6x16
2- 5x12
Any ideas would be great.
Thanks, Chris
that I know the kit should.
That consists of
1 the center crankcase
2 the clutch cover
3 the left case cover
4 then sub trans cover
5 the point and the stator covers
6 the rocker arm access cover
I still have 15 bolts left and can't figure what they are used for.
this is what's left
6- 6x25
4- 6x45
2- 6x30
1- 6x16
2- 5x12
Any ideas would be great.
Thanks, Chris
