A while back I scored a spare ct200 motor/carb from ebay. My '65 ct200 runs pretty good already, but It figured a spare motor would be nice, even just to rob obsolete spare parts from for these ancient bikes.  I got sick of the motor flopping around in my 2x4 square wooden stand, so I cobbled up a nice little stand from a piece of oak and some 1/2" pipe/fittings.  I plan on tinkering a bit with this spare motor and doing a top end rebuild. The stand will make this easier.  If nothing else, the old motor makes a nice piece of "garage art".   Unfortunately, the prior owner didn't know what a gasket was, and he used "make a gasket" goo on every mating surface!  He also chose to weld the slipping kickstart lever to the shaft..... image image image